What's hot?
IC Products
Panel Solution
Digital Photo Frame
Small Memory Card
Dual Interface Card 
Dual Interface Cartridge
Pendrive Reader
Pendrive
Standard Cards
Multimedia Products
IC Products

From fully costom to SoC, to 3D package, We have been writing the history of computer industry.

 
USB 2.0 OTG Bridge Controller
Complies with Universa I Serial Bus On-The-Go Supplement Revision 1.0a

Dual Host/Device OTG interface with up to 480Mbps transfer rate
Fully complies with Secure Digital V1.1 and Multi Media Card V 2.11 device interface
LCD/LED Interface support
Supports Ultra ATA33/66 Mode
Supports NAND flash memory interface
 

USB 2.0 ORG MP3 Codec
Single chip MPEG Layer3 Codec w stereo output

Support MP3/ WMA/ ASF audio format
Support MPEG 1 layer3/ ADPCM/G.729 audio format
Support 8-bit NAND Flash interface, major Samsung/ Toshiba/ Hynix/ Sandisk/ Micron/ Infineon NAND flash memories from 128MB to 8GB (either 16K or 128K block flash)
SD/MMC/CF/SM/ATAPI/MS/MS Pro support
USB2.0 OTG high speed device interface (up to 480MB/S transfer rate)


 

USB 2.0 Flash Drive Controller
USB 2.0 I/F Compliance & Bus Power Certified

MLC/ SLC NAND Flash support
Powerful hardware ECC function support
High performance w/ interleave technology
Best compatibility w/ USB upgrade function
Integrated On-Chip POR to reduced system cost
Lowest system cost due to low discrete components
High integrated & security utility


  USB 2.0 Flash Controller
High performance, low cost solution for USB flash drive
Support USB 2.0 HS/FS/LS transfer
Support 16M Bytes to 2G Bytes flash capacity
Support 512 Bytes/sector and 2KBytes/sector flash (MLC flash)
24 bits error correction capability
Low power consumption for operation and suspend
 

CUD Card Controller With MP3 Decoder
High performance, low cost solution for USB flash drive
Support USB 2.0 HS/FS/LS transfer
Support 16M Bytes to 2G Bytes flash capacity
Support 512 Bytes/sector and 2KBytes/sector flash (MLC flash)
24 bits error correction capability
Low power consumption for operation and suspend


 

CUD Card Controller
High performance, low cost signle chip solution for CUD Card
Single chip solution integrating USB 2.0, CF, and Serial/Parallel interface
Support true IDE mode, PIO mode, and memory mode
Support upto 8 NAND flash
USB 2.0 compliant HS/FS/LS transfer
Low power consumption for operation and suspend


 

USB 2.0 to PCMCIA Bridge
High performance, low cost solution for USB2.0 PCMCIA bridge

Support USB 2.0 HS/FS/LS transfer
Low power consumption for operation and suspend

 

USB 2.0 to IDE Bridge
High performance, low cost solution for USB2.0 PCMCIA bridge

Support USB 2.0 HS/FS/LS transfer
Low power consumption for operation and suspend

 

Digital Voice Processor
2.4 to 3.5 V for battery operated applications

Low power consumption
16-bit GPIO
On-chip DAC and PWM for voice/audio data playback
Support 2 channels voice/audio/midi
Play digital audio/voice up to 30 miniutes
Innovative algorithm for voice compression/decompression/recognition
training and optimized voice quality


 

MPEG Audio Codec
Single chip total solution for voice recording and MP3 decode/real-time encode, with.caraok function
Support USB 2.0 HS/FS/LS transfer
Support multiple flash card interfaces;including CF, SM, MMC, MS, SD, and UDisk
Easily firmware on-site upgrade for supporting future digital audio format
Low power consumption for operation and suspend

 

7in1 Flash Card Reader Controller
Single chip total solution for Card Reader for all the major flash cards; including CF, SM, MMC, MS, MS Pro, SD, XD and UDisk
Support USB 2.0 HS/FS/LS transfer
Easily firmware on-site upgrade
Low power consumption for operation and suspend

 

Li-Ion Battery Protector
Low supply current maximizes battery life
Accurate detector threshold
Accurate over-charge protection and over current protection
Wide range of thresholds and delay available
No delay-setting capacitor necessary


 

Li-Ion Battery Charger
Few external components
Better than 1% voltage accuracy
Ultra low cost PMOS/PNP pass device
Blocking diode not required
LED charge status and termination indicators
Battery failure detection